EUROCOM Monster 4, User Manual

Page: 30 / 33

29
Engl
ish
TPM
(Option)
Before setting up the TPM (Trusted Platform Module)
functions you must initialize the security platform.
Activating TPM
1. Restart the computer.
2. Enter the
Aptio Setup Utility pressing F2 during the POST .
3. Use the arrow keys to select the Security menu.
4. Select TPM Configuration and press Enter.
5. Press Enter to access the Security Device Support menu and
select Enable .
6. You will then need to press F4 to save the changes and restart
the computer.
TPM Management in Windows
You can manage your TPM settings from within Win-
dows :
1. Go to the Control Panel .
2. Click BitLocker Drive Encryption ( System and Security ).
3. Click TPM Administration .
4. The TPM Management window allows you to configure the
TPM within Windows . As TPM is usually administered within
large enterprises and organizations, your system administrator
will need to assist you in managing the information here.
TPM Actions
1. Click Prepare the TPM and follow the instructions in the Wizard
to prepare the TPM (this will probably require a restart of the
computer and confirmation of the setting changes after restart
by pressing the appropriate F key).
2. After the restart the TPM will be prepared and you can then use
the Actions menu to Turn TPM off , Change Owner
Password , Clear TPM or Reset TPM Lockout .
3. A wizard will help take you through any setup steps.
Figure 21 - BitLocker Drive Encryption
(TPM Administration)
Figure 22
Trusted Plat-
form Module
(TPM) Manage-
ment on Local
Computer Ad-
ministration
Figure 23
Actions Menu