Disassembly
Removing and Installing the Processor 2 - 17
2.Disassembly
Processor Installation Procedure
1.
Insert the CPU
, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!), and turn
the release latch
towards the lock symbol
(
Figure 13b
).
2.
Remove the sticker
(
Figure 13c
) from the heat sink.
3.
Insert the heat sink
as indicated in
Figure 13c
.
4.
Tighten the CPU heat sink screws in the order
,
&
(the order as indicated on the label and
Figure 13d
).
5.
Replace the component bay cover and tighten the screws (
page 2 - 15
).
A
B
C
D
1
2
3
c.
b.
d.
B
A
a.
C
D
1
3
2
Note
:
Tighten the screws
in the order 1, 2, 3 as
indicated on the la-
bel.
Figure 13
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Remove the sticker from
the heat sink and insert
the heat sink.
d. Tighten the screws.
A. CPU
D. Heat Sink
•
3 Screws
Summary of Contents for M770CU
