EUROCOM LP200ST, User Manual

Page: 86 / 113

5 – 19
5
Audio & Modem Setup (WinNT40)
A
UDIO
1. Click Start (menu) > Run... .
2. Navigate ( Browse... ) to D:\Drivers\Audio\Setup.exe and click Open > OK .
3. Follow the SiS PCI Audio Driver Setup on-screen instructions to install the driver.
4. Restart
Windows when the Setup Complete box appears.
M
ODEM
)
Note:
You have to install the modem driver after installing the audio driver.
1. Click Start (menu) > Run... .
2. Navigate ( Browse... ) to D:\Drivers\MDC\WinNT40\Setup.exe . Click Open
>
OK
>
Next
.
3. Select COM3 or COM4 when you are asked to choose a Comm Port for
your modem and click Next .
4. In the Modem System Information: box, click Next .
5. Select Don’t detect my modem; I will select it from a list and click Next .
6. Click CLEVO and LP200 MDC Modem for the manufacturer and model
and click Next .
7. When asked on which ports you want to install it, select Selected Ports ,
click COM3 and click Next .
8. Click Finish when you are told your modem has been set up successfully.
9. Close the Modems Properties dialog box and restart
Windows. (Your
modem is ready for dial-up configuration.)
; ;
; ;
;
Modem Country
Selection
Be sure to check if
the default setting for
the modem country
selection is appropri-
ate for you. (
Start
Menu > Programs >
LP200 MDC Modem
> Modem Country
Selection > Country )