Instruction Manual ZHK
V07-21.0
31/140
3.5.1 Weight details for monoblocs
The weight of the monobloc is specified on the AHU drawing. This weight must be considered at
choosing appropriate transportation means.
3.5.2 Lifting of monoblocs
-
Monoblocs are generally delivered with a perforated counter-frame
–
hole diameter 50 mm
–
for inserting suitable tubes/rods, where the AHU is lifted, see
-
The tubes/rods are not included in the delivery scope, but have to be provided by the company,
which is responsible for the lifting operation.
-
Two, three or more holes per side of the monobloc are available according to the length and
weight of the AHU. Consequently, two or more tubes/rods can be used.
-
The determination of the number and the dimensions of the tubes/rods and the load carrying
equipment are the responsibility of the performing company.
-
We recommend verification of the suitability of the selected tubes/rods by a structural engineer.
-
The force effect has to take place uniformly across all tubes/rods.
-
The load carrying equipment must be secured to prevent slipping off, e.g. see
Figure 21:
Guiding of load carrying equipment (mon-
obloc)
Figure 22:
Uniform load of the form tubes
Figure 23:
Securing against slippage of the load carrying equipment
Summary of Contents for ZHK
Page 1: ...ZHK INSTRUCTION MANUAL...