Euroclima ZHK, Manual

Page: 26 / 142

Instruction Manual ZHK
V07-21.0 25/140
Figure 8:
Permitted angle for load carrying equipment guidance
3.4 Over lifting of AHU sections with crane lugs
Chapter 3.4
is only valid for the delivery form
“Delivery in parts (delivery sections)”
.
For overlifting of AHU
s delivered as “Monobloc”, see
chapter 3.5 (Overlifting of monoblocs)
.
WARNING!
-
In addition to the actions mentioned here, the instructions according to
chap-
ter 3.3 (Further necessary actions for the overlifting of both, delivery
sections on crane lugs as well as monoblocs)
have to be observed.
-
Parts of the AHU may only be lifted with lugs individually
–
never bolt parts to-
gether before lifting.
3.4.1 Control of weight limits of delivery sections
WARNING!
Depending on the base frame height (see
Figure 9
), delivery sections may be
lifted with lifting lugs up to the following weight, refer to
Table 3
.
Base frame height H (mm) Max. section weight (kg)
80 1.500
100 1.500
200 4.000
Table 3:
Maximum AHU part weights for lifting by crane lugs
max. 15°
max. 15°