1
READ THIS BEFORE PLUGGING IN UNIT
Congratulations on choosing a MediGuard Medical Refrigerator. This set of instructions will
show you how to properly install and set up your unit to ensure optimal performance.
Failure
to follow these instructions may result in a Service Charge if a technician needs to attend. If
you require any assistance, please contact us on
1300 459 140
.
1.
Remove all packaging and wrap from the Unit
2.
Check for any damage to the unit. Report any damage immediately to 1300 459 140
3.
INSIDE THE UNIT:
4.
Fit the REAR SPACERS provided by screwing them into the empty screw holes at the rear base of the
unit above the wire grate. This prevents the Unit being pushed hard against a rear wall and allows
the Condensing Unit adequate ventilation.
Failure to fit the REAR SPACER will
VOID the WARRANTY.
5.
Keep the unit on a firm, flat and even surface. Do not place the unit in direct sunlight or near heat
sources. Ensure the room has adequate ventilation.
6.
Once the Unit has been positioned in its location, the front Castors have a BRAKE. Lock the brake on
both sides to prevent the Unit from moving when pulling on the handle to open the door.
MediGuard
RANGE
MGPL401
MGPL601
MGPL1001
REAR SPACERS
SHELVES
SHELF CLIPS
Keys x 2
