19
7 - C
O M M I S S I O N I N G YO U R W I N E CA B I N E T
V- -Humidity level display
Your wine cabinet is equipped with a hygrometry function (1-temperature and 2-temperature
models set between 9°C and 15°C / 48° and 59°F), enabling you to see the relative humidity level
inside the cabinet.
The ideal hygrometry rate is over 50%.
• Press on the button
for 5 seconds (for 2-temperature models, the button is located to
the right of the casing).
The relative humidity is displayed (from 50% to 90%).
After 15 seconds the display will automatically return to cabinet temperature.
Should you wish to increase the level of relative humidity inside your cabinet, pour the equivalent of one glass of water into the clay humidity cassette located
at the bottom right
hand side of your cabinet (see diagram on next page “Relative humidity level alarm”).
VI- Lighting mode adjustment
Your wine cabinet has mood lighting that also enables you to read your wine labels more easily.
Unlike standard lighting, EuroCave lighting does not produce ultraviolet rays, and only gives off a miniscule amount of heat.
Thus, your wines are preserved in total safety
Electrical consumption less than 7 watts / hour in constant use.
Usage precautions:
Intense light, never look directly into the beam.
There are two possible lighting settings:
- lighting when door opens (it goes out when the door is closed),
- lighting all the time (for mood lighting when using a glass door cabinet, for example).
• Press on the button
*
for 5 seconds, the lighting mode is then displayed.
• Press on the button
*
to select your lighting mode (two options):
Example of a display for 1-temperature model
•Press on the button
*
to confirm your choice and move on to the next step (setting display contrast)
Note: When “Ecl” is displayed, you have 15 seconds to select and confirm the required lighting mode, otherwise the display automatically returns to cabinet
temperature.
VII- Adjusting the display contrast
You can increase or reduce your cabinet’s display contrast:
Once you have confirmed the lighting mode, “LU n” appears:
• Press on the buttons
or
*
to increase or reduce your cabinet’s display contrast
• A figure of 0 to 7 is displayed after the “LU” (0 being the least contrast, and 7 the most).
• Press on the button
*
button to confirm your choice and move on to the next step (display of the carbon filter log)
Note: When “LU n” is displayed, you have 15 seconds to select and confirm the required lighting contrast, otherwise the display automatically returns to
cabinet temperature.
VIII- Carbon filter counter log display
Your wine cabinet has a counter that displays the number of days that the carbon filter has been in use (change once
a year, see current maintenance chapter page 21)
After setting the display contrast, the counter is displayed, as in the following example:
• The display here shows that the filter has been operating for 28 days
After 15 seconds the display will automatically return to cabinet temperature, or press on the
*
button.
* For 2-temperature, 3- temperature and multi-temperature models, the buttons are located to the right of the casing.
Lighting is in intermittent mode: comes
on when door is opened
Lighting is in constant mode
