![Eurocave Classic 83 Technical Manual Download Page 15](http://html.mh-extra.com/html/eurocave/classic-83/classic-83_technical-manual_2437165015.webp)
15
7 - C
O M M I S S I O N I N G YO U R W I N E CA B I N E T
IV - Temperature settings
a- 1 temperature models (V083 - V183 - V283)
Your wine cabinet's temperature is adjusted at the control panel which contains the following features:
• Temperature display: displays the actual temperature inside
your wine cabinet
• Adjustment buttons: enables the required temperature
inside the cabinet to be selected
• Indicator lights: display the operational status of the hot
(red) and cold (blue) circuits
To adjust the temperature of your 1-temperature cabinet:
• Press the
button and release it
immediately
The current set temperature is displayed
(the displayed figure flashes).
• When the displayed figure flashes you have
5 seconds to change the temperature setting
by pressing the
or
button
as appropriate, otherwise the display
automatically returns to the previous setting.
Recommended maturing setting range: 10 to 14°C (50° to 57°F)
• Press the
set button to confirm the new setting and the display will show the new setting.
The default setting is 12°C / 54°F (ideal maturing temperature). However, this setting can be adjusted between
5 and 20°C* (41° and 68°F*).
Beyond these limits, the buttons
and
are disabled.
*Converting your maturing cabinet into a service cabinet
You can use your 1-temperature maturing cabinet as a service cabinet in order to bring your white and red wine to tasting temperature
(setting range between 5° to 20°C / 41° to 68°F).
- White wines: recommended setting between 6° to 10°C (43° to 50°F),
- Red wines: recommended setting between 15° to 18°C (59° to 64°F).
This cabinet can therefore be used as a specific white or red wine service cabinet.
WA R N I N G : to operate corre c t ly your cabinet should be located in a room with a temperature between
0° and 35°C (32° and 95°F)
When making substantial changes to the temperatures it may take several hours to stabilise and display the required temperature.
Hot circuit operating
indicator light (red)
Cabinet
temperature setting
buttons
Selection and
confirmation
button
Cabinet
temperature
display
Cold circuit operating
indicator light (blue)
Temperature
zone
concerned
On/Off and
standby status
button
Infra-red “door open”
detection sensors