www.euroboor.com
11
1.
Operations such as sanding, wire brushing, polishing or cutting-off are
not recommended to be performed with this power tool.
Operations for which the power tool was not designed may create a
hazard and cause personal injury.
2.
Never put fingers on the switch button while moving the tool to avoid
unintentional starting of the electric die grinder.
3.
Ensure the mounting screws and other assemblies are fixed properly
and securely before operate the electric die grinder. Turn on the
switch and let the tool work for 30 seconds in a safe position. Stop
immediately if considerable vibration or other defects are detected,
have it repaired.
4.
Do not use accessories which are not specifically designed and
recommended by the tool manufacturer. Just because the accessory
can be attached to your power tool, it does not assure safe operation.
5.
Always use an approved and proper guard when using the accessories.
6.
The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running
faster than their rated speed can break and fly apart.
7.
The outside diameter and the thickness of your accessory must be
within the capacity rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or controlled.
8.
The shank size of your accessory must properly fit the spindle of the
