www.euroboor.com
7
6.
Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are
less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
8.
Use only accessories that are recommended by EUROBOOR for your power tool. Accessories
that may be suitable for one machine, may become hazardous when used on another power
tool.
SERVICE
1.
Power tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in risk of injury.
2.
When servicing a power tool, use only identical replacement parts. Follow instructions in the
maintenance section of this manual. Use of unauthorised parts or failure to follow
maintenance instructions may create a risk of electric shock or injury.
1.2 Specific safety information
1.
ELECTRICAL SAFETY
DANGER:
Electrical voltage! Risk of fatal injury due to electrical shock!
a)
Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or modify
the plug in any way. Do not use adaptor plugs. Check with a qualified electrician if you are
in doubt whether the outlet is properly grounded. If the tools should electrically
malfunction or break down, grounding provides a low resistance path to carry electricity
away from the user
b)
When operation the tool outside, use an outdoor extension cord market “W
-
A” or “W”.
These cords are rated for outdoor use and reduce the risk of electric shock
c)
Extension cables must have a sufficient cross-section so as to prevent an excessive drop in
voltage, or overheating. An excessive drop in voltage reduces the output an can lead to
failure of the motor
d)
Never use multiple extensions cables together. Use a single longer one instead
e)
Check the plug, cable and machine for damage each time using the machine
f)
Remove the plug from the plug socket before undertaking an maintenance work on the
power tool
