4
1. Safety
1.1 General safety instructions
Do not use this power tool before you have thoroughly read and completely understood this
Instruction Manual and the “General Safety Instructions”, including the figures, specifications, safety
regulations and the signs indicating DANGER, WARNING and CAUTION.
WARNING:
When using tools intended for use in potentially explosive atmospheres, basic
safety precautions should always be followed to reduce the risk of fire and personal injury.
Please also observe the relevant national industrial safety regulations. Non-observance of the safety
instructions in the said documentation can lead to burns and other severe injuries.
This Operator’s Manual including the “General Safety Instructions” should be kept for later use and
enclosed with the machine, should it be passed on or sold.
WORK AREA
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.
Do not operate the machine in highly explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Hot machine parts, cutters or workpiece may ignite the
dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a magnetic drilling machine.
Distractions can cause you to lose control.
4.
Do not expose the machine to rain or wet conditions.
PNEUMATIC SAFETY
1.
The air supply should always be turned OFF and disconnected before installing or removing
any accessory on or from this machine.
2.
The machine requires clean and dry air at a pressure between 6.3 and 8.0 bar (90 and 116
PSI). Unstable or too high air pressure may damage the machine and/or cutters and drills.
3.
Female air supply outlet connectors must match the male connector inlet on the machine.
Never modify them in any way. The standard male 3/8" connector can be replaced by
another of a different connection type with an M15 thread. Only use fitting alternative
connector pairs.
4.
Do not abuse the air hoses. Never use the hose on the machine to carry it. Never pull the
outlet connector on the hose from the inlet connector on the machine by pulling at the hose.
Keep the air hoses away from heat, oil, sharp edges or moving parts. Replace damaged hoses
immediately. Damaged hoses may cause air leakage and impact the performance of the
machine.
PERSONAL SAFETY
1.
Stay alert, watch what you are doing and use common sense when using a pneumatic
magnetic drilling machine. Do not use the machine while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating machines may result
in serious personal injury.
Summary of Contents for AIR.55
