Euroboor AIR.55, Operator'S Manual

Page: 19 / 34

19
4.4 Tool lubrication
HORIZONTAL APPLICATIONS
In order to use the lubrication system, the tank must be filled with a cutting fluid or oil
1. Make sure the flow regulator is closed
2. Unscrew the cap
3. Fill the container with cutting fluid or oil
4. Screw the cap back on
•
Adjust the fluid flow as required using the flow regulator;
•
Add more cutting fluid if the shavings (metal chips) become blue.
VERTICAL AND OVERHEAD APPLICATIONS
Dip the cutter in cutting paste or apply an appropriate spray.
WARNING:
Do not use the lubrication system in vertical or overhead drilling applications.
Instead use EUROBOOR cutting paste or spray
Make sure to use only suitable cutting oil or fluid. EUROBOOR offers a wide range of cutting
lubricants for all tool and material combinations. Proper cooling will help you create better and faster
results, and extend the lifetime of your tools.