Euroalpi Monviso, Use And Maintenance Manual

Page: 39 / 50

Now proceed with the removal of the front wall; to do this, you must
lift the piece upward in order to remove it from its place and finally
pull even the latter.
The last phase is the extraction of the central column: to do this,
you simply have to raise the column from its place and finally
remove the piece. Suck and clean very well with the help of a paint
brush the inside of the stove, being careful, however, not to let
dirt in the place of the central column.
Warning
Check all the inside, and then proceed with the reassembly of all components, paying attention to the
correct repositioning, greater is the attention and care in cleaning the stove, easier it will be to reassembly
all components because dirt may cause interference in the assembly. Do not reassemble broken or
damaged parts which may cause the malfunction of the stove.
Notes for reassembly
The points to be followed for the proper repositioning of the parts are as follows:
1) Installation of the central column.
2) Installation of the front wall.
3) Installation of the right and left duct.