Euroalpi Monviso, Use And Maintenance Manual

Page: 21 / 50

10.9 Switching off the stove
To turn off the stove just make a prolonged pressure on the button P3. The display shows the message
"CLEANING FINAL".
(Figure 11)
.
Figure 11
The motor of the auger stops and the smoke fan speed increases. The exchanger fan will remain active until
the fumes temperature drops below the value set by parameter PR15. After about 10 minutes the stove
turns off, visualizing the message “OFF“(
Figure 11a
). To restart the stove you have to wait about 10 minutes.
During this time the pressure on the P3 button does not generate any answer by the system.
Figure 11a
11 THE MENU
You can enter the menu with a prolonged pression on the P1 button. The menu is subdivided into different
entries and levels that allow you to enter the settings and the programming of the board.
11.1 User menu
The following table synthetically describes the structure of the menu dwelling, in this paragraph, upon the
selections available to the user.
Level 1 Level 2 Value
M1 - set clock -
01- Day of the week M-T-W-T-F-S-S
02- Hours clock 0-23
03- Minutes clock 0-59
04- Day clock 1-31
05- Month clock 1-12
06- Year clock 00-99
Level 1 Level 2 Level 3 Value
M2 - set time
M2-1 - enable time
01 - enable time on/off
M2-2 – daily programming
CLEANING FINAL
Off