Touch control user
instructions
CONTROL PANEL ELEMENTS
N.B.:
* Only visible when in operation.
The sensors marked on the control panel
are used for control purposes.
There is no need to exert pressure on the
glass - you enable the function you requi-
re simply by touching the sensor with your
finger.
Each action is confirmed by a beep.
SWITCHING THE APPLIANCE ON
1)
Touch the on sensor
(1) for at least
one second. The Touch Control will acti-
vate, you will hear a beep and the indi-
cators will turn on. If any of the cooking
areas is hot, the corresponding indicator
will alternate between showing a
H
and
a
0
.
The following action must be carried out
within 10 seconds or the touch control will
automatically switch off.
When the touch control is activated, it can
be disconnected at any time by touching
the sensor
(1), even if it has been
blocked (blocking function activated). The
sensor
(1) always takes priority for dis-
connecting the touch control.
SWITCHING THE HOTPLATES ON
The hotplates will be found deactivated,
with their respective power indicators (3)
at
0
, until a power level is selected. If all
the hotplates are set at
0
, you have 10
seconds to activate any of them, otherwise
the touch control will automatically turn off.
Use the sensors
and
(4/5) to select
a power level. If you touch the sensor
(5), the plate will switch to level
1
and,
Use and Maintenance
1 On/off sensor.
2 Hotplate indicators.
3 Power and/or residual heat indicators.
4 Reduce power sensor (less).
5 Increase power sensor (more).
6 Timer/Clock indicator.
7 Indicator of selected time (clock).
8 Locking sensor (for the rest of the
sensors
,
eccept on/off).
9 Indicator light of the induction
element with timer.
10 Pilot light for activated locking.
11 Time reduction sensor on clock (less).
12 Time increasing sensor on clock (more).
13 Countdown indicator (blinks each second).
30 cm.
9
