16
When the glass’s colour changes.
This does not affect its effectiveness or
stability, and is generally caused by inade-
quate cleaning or by poor-quality pans.
Metallic sheens
are caused by metal pans
sliding over the glass. They can be remo-
ved by thorough cleaning with a special,
glass ceramic cleaning agent, although it
may be that the cleaning needs to be repe-
ated more than once.
Worn trim
is the result of using abrasive
cleaning products or pans with uneven
bases which wear down the serigraphy.
Please note:
Take great care when using the
glass scraper. The blade can cause
injury!
If you do not use the scraper pro-
perly, the blade could break and pieces
may get stuck between the decorative
side-piece and the glass. If this hap-
pens, do not try to remove the pieces
with your hand - use pliers or a sharp-
pointed knife (see fig. 5).
Only use the blade on the glass
ceramic surface - avoid the body of the
scraper coming into contact with the
glass, since this could scratch the
glass ceramic.
Use blades that are in perfect con-
ditions, and change the blade as soon
as it shows any sign of wear.
When you finish using the scraper,
fold it away and cover it well up (see fig. 6).
Pans may stick to the glass if
something has melted between them.
Do not attempt to unstick the pan when
it is cold - you could break the glass
ceramic.
Manufacturer
reserves the right to alter its
manuals in any way it deems necessary or use-
ful while not altering their basic characteristics.
Environmental
considerations
The symbol
on the product or on
its packaging indicates that this pro-
duct may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help pre-
vent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappro-
priate waste handling of this product, ple-
ase contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Packaging materials are organic and fully
recyclable. Plastic components are identi-
fied by marking >PE<, >LD<, >EPS<, etc.
Throw out packaging materials, such as
household waste, in the container of
your municipality.
fig. 6
Protected blade Unprotected blade
Using the scraper
fig. 5
