OPERATING INSTRUCTIONS
Using The Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories
.
WARNING: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP.
ALWAYS remove the chopping blade
protective covers before using.
The double chopping
blade may be
used with one
blade or with
two blades.
1. To use as
a double
blade, carefully
slip the separate
blade over the
shaft of the
main blade.
(Fig. 10 & Fig. 11)
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 12)
Main Blade
Double
Blade
Two Blades Together
Fig. 10
Fig. 11
Fig. 12
Fig. 13
5. Plug the processor into a wall outlet.
6. Turn the speed control dial to the
desired speed setting.
Fig. 15
8.
When finished processing the
ingredients, remove the processor lid
by turning clockwise.
9.
Remove the chopping blade first
before removing the processed food.
FOR SAFETY, ALWAYS USE THE
FOOD PUSHER WHEN PUTTING
FOOD INTO THE THE FEEDER TUBE.
NEVER FEED BY HAND.
10.
Do NOT
leave the appliance
unsupervised when it is in the "ON"
position.
7. Keep hands and utensils away from
the cutting blade while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but
ONLY
when the food
processor is
NOT
running and has
been unplugged.
Never
feed food by
hand. Always use the food pusher.
(Fig. 15)
3. Place ingredients to be processed in
the bowl.
4. Then holding the processor lid by the
feeding tube, place the processor lid
onto the bowl and turn counter
clockwise to lock the lid in place.
Ensure that the lid tab has "clicked"
into place and that the arrow on the
lid is aligned with the dot on the unit.
Insert food pusher into feed chute.
(Fig. 13 & Fig. 14)
5
OPERATING INSTRUCTIONS
Whipping Attachment
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
1. Fit the processor bowl and spindle as
described previously on page
4.
2. Fit the whipping attachment over the
spindle and press firmly into place.
(Fig. 22)
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as
described in the “Setting Up” section
(page 4).
5. Plug in the food processor.
6. Turn the food processor on selecting
high speed.
7. Recommended speed for whipping
is high.
8. Remove the whipping attachment from
the bowl before removing the whipped
ingredients.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE OPERATING
THE PROCESSOR.
Fig. 22
Juice Extractor (Cont.)
3.
Fit the juice extractor
lid over the extractor
and rotate counter
clockwise ensuring
that the lid tab has
clicked into place
4.
Plug in processor.
5.
Turn speed control to minimum
(use only on
minimum speed).
6.
Use the juice
extractor pusher
to add fruit into
the food tube.
(Fig. 25)
7.
If the juice extractor becomes
clogged during use, turn the
processor off and remove the
juice extractor. The excess pulp
can now easily be removed
using the spatula.
Be sure to switch the appliance
to the “OFF” position after each
use. Make sure the motor stops
completely and you unplug the
unit before disassembling.
FOR SAFETY, ALWAYS USE
THE PUSHER WHEN
PUTTING FRUIT INTO THE
FEEDER TUBE - NEVER FEED
BY HAND.
Do not put your fingers or other
objects into the juicer opening
while it is operation. If food
becomes lodged in the opening,
use food pusher or another
piece of fruit or vegetable to
push it down. When this
method of removing food lodged
in the opening is not possible,
turn the appliance off, unplug
the unit and disassemble juicer
to remove the remaining food.
Juice Extractor
CAUTION: Make sure that the unit
is unplugged from the power
source and the speed control dial
is in the “OFF” position before
inserting or removing
attachments.
1. Fit the processor
bowl as detailed
previously
(page 4). (Fig. 23)
2. Fit the juice
extractor/filter into
the processor bowl.
(Fig. 24)
Fig. 23
Fig. 24
Fig. 25
8
Fig. 14
Using The Double Chopping Blade
(Cont.)
Note:
When whipping thin liquids such as
skim milk, use only 3 oz. of liquid at a time.
Summary of Contents for EP96W
Page 2: ......