GETTING TO KNOW YOUR QUAD BLADE FOOD
PROCESSING CENTER
1. Processor Body
2. Safety Cover
3. Safety Cover/Blender Location
4. On/Off Speed Control Dial
5. Turbo/Pulse Button
6. Drive Shaft
7. Storage Compartment
8. Blender Jar
9. Blender Lid
10. Measuring Cap
11. Processor Bowl
12. Spindle
13. Processor Lid
14. Food Pusher
15. Juice Extractor Lid
16. Juice Extractor Pusher
17. Juice Extractor Filter
18. Whipping Attachment
19. Citrus Juicer Filter
20. Juice Reamer
21. Main Chopping Blade
22. Double Chopping Blade
23. Chopping Blade Protective Cover
24. Blade Holder
25. French Fry Disk Assembly
26. Dough Blade
27. Thick Slicing Blade
28. Thin Slicing Blade
29. Fine Chopping Blade
30. Coarse Chopping Blade
31. Spatula
Technical Specifications
Voltage:
120V., 60Hz.
Power:
800 Watts
Food Processor Capacity:
6 Cups (1.5 Liters)
Blender Capacity:
7 Cups (1.75 Liters)
3
NOTE:
TO REMOVE THE
BLENDER, YOU MUST
FIRST UNLOCK AND
REMOVE THE
PROCESSOR LID (A).
THEN UNLOCK AND
REMOVE THE BLENDER (B)
BY TWISTING CLOCKWISE.
(Fig. 34)
WARNING:
ALWAYS REMOVE THE
BLENDER AND FIT THE
SAFETY COVER INTO THE
PROCESSOR BODY WHEN
USING THE PROCESSOR.
(Fig. 35 & 36)
Operating the Blender (Cont.)
NOTE:
You can crush 16 oz.
(500 ml) of ice cubes in the blender
using the
PULSE/TURBO
button.
CAUTION:
To prevent spilling
(overflow) do NOT operate the
blender with more than 4 cups
(1000 ml) of soft liquid (i.e. soup) at
one time.
* Always operate the blender with the
blender lid in place.
* When blending hot liquids, always
remove the small measuring cap in
the blender lid.
* Avoid contact with moving parts at
all times.
* Keep hair, clothing as well as
spatulas and other kitchen utensils
out of the blender jar while in
operation to reduce the risk of
severe injury to persons or damage
to the blender. A spatula may be
used but
ONLY
when the unit is not
in use.
OPERATING INSTRUCTIONS
Fig. 34
Fig. 35
Fig. 36
Re-settable Thermal Safety
Device
Your Quad Blade Food
Processor/Blender has been designed
with a unique safety system which
prevents damage to the unit’s motor
and drive system, should you
inadvertently overload your appliance.
The safety system will automatically cut
the electric power to the appliance
when the device senses an overload or
excessive temperature in the motor or
drive system. Should this occur during
use and the appliance stops
functioning, following is the re-setting
procedure:
1.
Turn the “ON/OFF” speed control
to the “OFF” position
2.
Unplug the unit from the wall
receptacle.
3.
Remove and empty the processor
bowl. Ensure that no food is
jamming the cutting blades or
attachments.
4.
Allow the appliance to cool down
for a minimum of 30 minutes.
5.
Re-install the processor bowl and
re-plug appliance in the wall outlet.
6.
Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the “ON/OFF”
speed control to the “OFF” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
10
Summary of Contents for EP96W
Page 2: ......
