33
C. TO CHECK SELECTED PATTERNS
You can check selected patterns as
following.
1. Press the Read button.
Last selected pattern will be highlighted.
2. Press the Scroll left button.
Highlight will move one pattern to the left.
3. Check selected patterns by pressing
Scroll left or right button.
4. Press the Read button again to return to
selecting mode.
D. ADJUSTING STITCH WIDTH AND
LENGTH
You can adjust the stitch width and length of
decorative pattern.
1. Press the Read button.
2. Select the pattern (highlight) you want to
adjust.
3. Adjust stitch width and length pressing the
Function button.
a. Stitch Width decrease.
b. Stitch Width increase.
c. Stitch Length decrease.
d. Stitch Length increase.
Preset Width and Length will be indicated
in highlight.
4. Press the Read button again to return the
selecting mode.
E. TO DELETE SELECTED PATTERN
1. If you selected undesired pattern, press
the Clear button short time (less than 0.5
sec.).
Machine will delete the last selected
pattern.
2. If you want to delete all patterns, press
the Clear button long time (over 0.5 sec.).
Machine will delete all selected patterns.
C. Revisión de los Patrones
Seleccionados
Usted puede revisar los patrones
seleccionados de la siguiente forma:
1. Presione el botón de lectura. El último
patrón seleccionado quedará resaltado.
2. Presione el botón visualizador izquierdo.
La luz resaltadora se moverá al siguiente
patrón de la izquierda.
3. Continúe seleccionando los patrones
presionando el botón visualizador
izquierdo o derecho.
4. Presione el botón de lectura nuevamente
para regresar a la función para
seleccionar.
D. Regulación del Ancho y Largo de la
Puntada
Usted puede regular el ancho y largo de las
puntadas decorativas.
1. Presione el botón para lectura.
2. Seleccione el patrón que desea
resaltándolo.
3. Regule el ancho y largo de la puntada
presionando el botón de la función
correspondiente.
a. Aumento del ancho de la puntada.
b. Disminución del ancho de la puntada.
c. Aumento del largo de la puntada.
d. Disminución del largo de la puntada.
El ancho y largo seleccionado para la
puntada quedarán resaltados.
4. Vuelva a presionar el botón de lectura
para regresar a la función para
seleccionar.
E. Para Borrar el Patrón Seleccionado
1. Si se equivocó al seleccionar un patrón,
presione el botón borrador por un tiempo
corto (menos de 1/2 segundo) y borrará el
último patrón seleccionado.
2. Para borrar todos los patrones
seleccionados, presione el botón borrador
por más tiempo (más de 1/2 segundo). La
máquina borrará todos los patrones
seleccionados.