STEP 1:
1.Assembly the first flat washerØ20,the support spacer,the second flat wahsner Ø20,
and the third flat washer Ø20 onto the end of the axle of lnstall tube assembly in
turn.First insert the Ø4x40 cotter pin into the small hole on the axle and then
bend to fix it.(see illustration a).
3.On one end of the axle that has the hole of Ø7,put the pin into the hole on the inboard of
wheel.(see illustration b)
ASSEMBLY INSTRUCTIONS
2. Repeat at the other side of axle.
STEP 2:
1.Insert Hex Bolt M6x50
after aliging the hole at the
flat end of Hitch Tube(stay
on top)with the one at the
middle of
Crossover Tube.
Connect
it by using big Flat
Washer Ø6 and lock Nut
M6 and don’t screw it up
moderately. (see
illustration c)
2.Install the Adjustable
Plate Support Tube on the
Hitch Tube using Hex Bolt
M8x50 and Lock Nut
M8(see illustration d)
