Eurekazone EZSMART, Manual, Page: 6 / 6

Eurekazone, LLC 1904 NE Jacksonville Rd Ocala, FL 34470
Phone (352) 620-2262 Fax (352) 620-2576 Techsupport@eurekazone.com www.eurekazone.com
COMPLETING THE BENCH
Before installing the Clamping Bench Top, take some time to verify the dimensions between the Side Rails
(Part A) and between the End Rails (Part B). The interior dimension between the Side Rails should be 24”. The
interior dimension between the End Rails should be 48”. Make any necessary adjustments at the corners.
24”
48”
Step 1
Attach the Clamping Bench Top to the End and
Side Supports with the included #8 x 3/4” pan
head screws (Part N).
Step 2
The final step in the assembly of the
Clamping Bench is to attach the Frame
Brace (Part I) using the included
hardware. Remove the hardware from
the Frame Brace and insert the head of
the bolt into the bottom channel of each
Side Rail toward the middle of the table.
Slide the Frame Brace over the bolt
followed by the washer and the nut.
Tighten the nuts to secure the Frame
Brace.
V15-01
Page 5