Eurekazone, LLC
1904 NE Jacksonville Rd Ocala, FL 34470
Phone (352) 620-2262 Fax (352) 620-2576
FRAME ASSEMBLY (cont)
Step 3
Step 4
Slide the End Support Bracket (
Part C
) and Connector (
Part D
) unit into the End Rail (
Part B
)until the Bracket
touches the Corner. Snug, but do not yet fully tighten the 1/2” hex screws (
Part G
). Slide the Side Support
Bracket (
Part E
)and Connector (
Part F
) unit into the Side Rail (
Part A
)until the Bracket (
Part C
) touches the
Corner. Snug, but do not yet fully tighten the 1/2” hex screws (
Part G
).
Repeat the above assembly steps for the diagonally opposite corner with the remaining End Rail (
Part B
) and
Side Rail(
Part A
).
Step 5
The two assembled Corner-Rail units will now be joined together with the two remaining Corners. Be sure
that the vertical connectors on the Corners are facing the sides of the bench frame. The Side Rails (
Part A
) will
overlap the End Rails (
Part B
) as in Step 1.
2
nd
Corner-Rail unit
1
st
Corner-Rail unit
V15-01
Page 3