background image

www.eureka.com 

3

This device complies with Part 15 of the 
FCC Rules. 
Operation is subject to the following 
two conditions: (1) this device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.

•  Only operate the device in accordance with 

the instructions supplied.

This device complies with FCC and IC 
radiation exposure limits set forth for an 
uncontrolled environment. In order to avoid the 
possibility of exceeding the FCC and IC radio 
frequency exposure limits, human proximity 
to the antenna shall not be less than 20cm 
(8 inches) during normal operation.

approved by the party responsible for 

operate the equipment.

This equipment has been tested and found 
to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation. This 
equipment generates uses and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instructions, 
may cause harmful interference to radio 
communications.

However, there is no guarantee that 
interference will not occur in a particular 
installation. If this equipment does cause 
harmful interference to radio or television 
reception, which can be determined by 
turning the equipment off and on, the user is 
encouraged to try to correct the interference by 
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the 
equipment and receiver.

•  Connect the equipment into an outlet on  

a circuit different from that to which the 
receiver is connected.

•  Consult the dealer or an experienced  

radio/TV technician for help.

Summary of Contents for NER700 Series














Reviews: