www.eureka.com
7
1. Install the side brush before use
Turn robot over and locate circle on both side, align the small
circle of the spinner brush post in the center of the spinning
brush and push until it clicks in place.
Note: Left and right side bursh differs in color.
2. Install mopping tank
I, disassemble wate tanke by pressing water tank release
button.
II, install mopping cloth on the bottom of water tank.
III, inject water through tank gate.
IV, install water tank back to robot.
!
Before running the robot, clear area of power cords,
pull cords for curtains or blinds, clothing and fragile items.
1.
wall and ensure there are at least 3 feet of
free space along the wall on either side of the
dock, so the robot is not blocked.
2.
Connect the charger into the port on the lower
right side of the dock and plug the other end
of the charger into the wall.
3.
Place robot on charger and ensure that the
metal charging contacts on the bottom of the
robot and those on the dock are touching.
When yhe robotic is correctly lined it will make
a vocie remind "System connected" and
the power button on the robot will light up.
4.
The light on power button will blink while the
robot is charging and will turn to a solid white
once the robot is fully charged
5.
Before initial use fully charge the robot for at
least 4 hours.
3 Ft
3 Ft
3 Ft
3 Ft
When the battery power reaches less than 20%
the robot will shut off the suction power and
automatically return to the charging dock.
The robot may occasionally back up off the
charger and then go forward back onto charger
to realign itself if a better connection is needed
with the metal charging contacts.
Please note the robot will arrive with a partially
charged battery. If you start using it before fully
charging the battery, the cleaning cycle will be
shorter than normal as it will return to the dock to
recharge when it reaches 20% battery power.
b. When the battery is low, please charge as soon as
possible
c. If you do not use the appliance for an extended
period of time, fully charge the battery and store in a
well ventilated and dry place
d. If the appliance is not used for more than 3 months,
charge the appliance for 12 hours
3.
1.
2.
4.
