The ideal place for your Aquaguard Verve is above the
kitchen sink, or a convenient location near the source of
tap water.
Your Aquaguard Verve can be fitted on the wall through
key slots provided at the back.
INSTALLATION
Your Aquaguard Verve will be installed free of cost by
our experienced Service Representatives.
You will require a standard 220/230 V supply and a
5 amp. point. This should be a three pin type and
properly earthed.
You can either have :
Standard Installation
Pre-Cooler Installation
Hot and Cold Installation
Standard Installation with a Pressure Pump (for
low water pressure areas)
Standard Installation with a Pressure Reducing Valve
(for high water pressure areas)
All installations other than Standard will be at
an additional cost.
Different Ways To
Install Your
Aquaguard Verve
6
