9
5.5. SETTING AND INSTALLATION OF THE ARBOR IN THE DOOR
HANDLE SET
The arbor shall be placed in the socket located in the device body marked with triangle (Fig.
9, Item 10), and the install the locking pin located in the accessory set.
Warning!
By installing the pin in the arbor remember that the element
located on the lock body is directed towards the handle (Fig. 9,
Item 10 and item 5.3).
Having placed the pin adjust it so that it fits the prepared ope
-
ning of the arbor socket.
Fig. 8.
5.6. ELECTRIC CONNECTIONS
Fig. 9.
The electromechanical lock door handle set is supplied by DC 6 V power (4 x alkaline battery
type AA 1.5 V).
To install the lock door handle set in door:
-
use the existing one or prepare installation holes in accordance with the template pro
-
vided on page 13 of this guide,
-
screw the installation bushings into the screw union of the internal part of the door han-
dle set,
-
insert connection wires from the external portion of the door handle set into the opening
made under the arbor opening,
-
put the external portion of the door handle set with connecting bushings through the
door wing with the lock installed,