7
Note
1. Template (to be cut out) with the spacing of installation openings in 1:1 scale is provided
on page 13 of this guide.
2. In the case of using ELB-06B9 washers (bezels) performance of the 25 mm opening can
be omitted (Fig. 4, Item 3).
5.3. SETTING HANDLE ORIENTATION (LEFT-/RIGHT-HAND DOOR)
Subsequently, check the manner of door opening, to set the door handle set handle in a
proper manner. All door handle sets are universal and they can be installed on both left- and
right-hand doors.
5.3.1. HANDLE ORIENTATION SETTING - FRONT OF THE DOOR
HANDLE SET
In order to determine the direction of opening, just unscrew the fixing screws located under the
opening plug (Fig. 5, Item 1), next to the cylinder of the door handle set lock (Fig. 5, Item 3). Then
remove the handle and rotate and install again using the screw (Fig. 5, Item 2).
Fig. 5.
5.3.2. HANDLE ORIENTATION SETTING – BACK OF THE DOOR
HANDLE SET
In order to determine the direction of handle opening, unscrew the fixing screw located
on the internal portion of the door handle set (Fig. 6, Item 1), then change its position and
install the handle again using the fixing screw.