14
7.4.3.4. From the list, select the code transmission method:
-
- the code will be sent via WeChat app, under the condition the
WeChat app is configured;
-
Text Meg
- the code will be sent via a text message- the text message
will contain a template with information on the access code, its expiry
date etc. - it is possible to edit any text messages;
-
- the message will be sent via e-mail, under the condition of pos-
sessing configured e-mail account on the mobile device.
7.4.4.
eKeys
- list of generated and sent access codes - with information on keys - key
type, activity status - it is possible to remove the given key from the list, in order to
remove press and hold the given key until ‘Delete’ button appears, upon its click-
ing the key becomes permanently deleted.
NOTE:
Removing an active key from the list in the app prior to its expiration is
possible, in order to remove, the device with the app must be connected to the In-
ternet, and the key will be removed only when the person receiving the key is also
connected to the Internet. Information on premature key removal will be down-
loaded from server.
All keys can be deleted from the list at once:
- click the icon with three dots in the upper right corner of the app;
- select reset eKeys;
- confirm that you want to reset keys - enter the password of the app administrator.
7.4.5.
Passcodes
- list of generated and sent access codes - with information on codes -
type, activity status - it is possible to remove the given code from the list, in order
to remove press and hold the given code until ‘Delete’ button appears, upon its
clicking the key becomes permanently deleted.
NOTE:
In order to remove a permanent code, one must remain within the range of
the Bluetooth transmitter built in the door handle set.
All codes can be deleted from the list at once:
- click the icon with three dots in the upper right corner of the app;
- select reset passcodes;
- confirm that you want to reset codes - enter the password of the app administrator.
7.4.6.
1C Cards
- door handle sets with access control possess Mifare 13.56 MHz card
reader built in. By clicking the IC Cards icon, the card management panel is opened.
In order to add the Mifare card:
- click the icon with three dots in the upper right corner;
- select ‘add IC Cards’ option;
- enter the card name in the ‘Name’ field;
- select the access type - permanent or timed;
- in the case of a timed access being selected, specify its period of validity;
- click OK and wait for signal from the door handle set;
- after the sound message, place card near the ‘2’ digit in the numerical keypad of
the device;
All cards can be deleted from the list at once:
- click the icon with three dots in the upper right corner of the app;
- select ‘Clear IC cards’;
- confirm that you want to reset cards - enter the password of the app administrator.