Euphonix TT007 Operation Manual
Appendix
36
A.3.3
Pro Tools as Controller
In the Synchronization tab of the Pro Tools Peripherals dialog (Figure A-7), deselect
the
Enable Control of Pro Tools via MMC
checkbox.
In the MIDI Controllers tab, configure the settings as shown in Figure A-8.
Figure A-8
MIDI Controllers tab in the Pro Tools Peripherals dialog
In the Transport Control, set the Transport menu to
Pro Tools
(Figure A-9).
Figure A-9
Pro Tools Transport Controls
On the TT007, set the MIDI port to
Controller
. This setup will not allow track-arming
from the console but will allow recording to be initiated from the console.