4
9
Specifications
Model:
iAMP®Micro; iAMP®Doubler
Type:
Solid State, Integrated Musical Instrument
Amplifier with Class D Power Amp and Switching
Power Supply
Power:
550 watts RMS@4 ohms, 550
watts RMS@2 ohms, 350 watts RMS@8 ohms
Line Voltage:
85-132; 170-264 selectable
Weight:
Micro: 2.25 pounds, Doubler 2.5 pounds
Country of Manufacture: United States of America
Euphonic Audio, Inc. reserves the right to modify design
or specifications when deemed necessary, or when
materials or procedures dictate.
A LOOK INSIDE
In order to make the iAMP Micro and Doubler the smallest and most versatile musical
instrument amplifiers on the market, EA has designed in three levels of configuration/
adjustment. The first two levels, the front panel and the top mounted trim pots have
already been examined. The third level of configuration represents one time settings
that reflect the way you play and your setup.
There are no user serviceable parts
inside the iAMP, an authorized EA dealer can configure your iAMP Micro or
Doubler to suit your playing needs and styles.
Location of Jumpers and Trim Pots as viewed from the top of the Micro and Doubler
J
umper on JP2 pins 1 & 2 =
Channels 1 & 2 (DEFAULT)
Jumper on JP2 pins 2 & 3 =
Channels 1 only
Jumper on JP3 pins 3 & 5 = DI is
post EQ
Jumper on JP3 pins 4 & 6 = DI is
pre EQ (DEFAULT)
Jumper on JP4 pins 1 & 2 = Tuner/Send is ON
Jumper on JP4 pins 7 & 8 = DI is OFF
(DEFAULT)
Jumper on JP4 pins 3 & 4 = Tuner/Send is OFF
Jumper on JP4 pins 5 & 6 = DI is ON
Jumper on JP6 pins 1 & 2 = For use
with dual footswitch to control IIS
and Muting
Jumper on JP6 pins 2 & 3 = For use
with mono footswitch to control IIS
(DEFAULT)
Jumper location illustration (from top looking down)
C 1
Trim
Pot
C 2
Trim
Pot
HPF
Trim
Pot
DI
Out
JP2
JP3 JP4
JP6
There are four internal jumpers (JP2, JP3, JP4 and JP6) that can be configured as
follows:
JP2 - Assigns Channel 2 to the Effects Send circuitry. Channel 1 is always there no matter what
position the jumper is in. Repositioning the jumper adds channel 2.
JP3 - Assigns the DI signal to either pre (clean) or post (colored) EQ.
JP4 - Configures the Mute Switch. The Mute Switch always mutes the speaker out. Addionally:
JP6 - Configures the function of the Footswitch.
