background image

L

IMITED 

W

ARRANTY

The warranty for Euphonic Audio Amplifiers and Speaker Cabinets is
THREE YEARS from the date of purchase. This covers defects in material
and workmanship for the ORIGINAL owner.

The warranty is void under the following conditions:

If the unit has been damaged due to accident, improper
handling, installation or operation

If the unit has been damaged in shipping

Abuse or misuse. This includes exceeding the physical limitations
of amplifier or speaker cabinet, i.e. using excessive bass boost in
the Wizzy 10.

Unauthorized repair or attempted repair

If the serial number has been defaced or removed

Euphonic Audio, Inc reserves the right to make such determination of the
above on the basis of factory inspection.

All liability for any incidental or consequential damage for breach or any
expressed or implied warranties is disclaimed and excluded here from.

Some states do not allow limitations on how long an implied warranty lasts,
or the exclusion or limitation of incidental and/or consequential damages, so
that the above limitation or exclusion may not apply to you. This warranty
gives specific legal rights and you may also have other rights, which vary
from state to state.

Thank you for purchasing the EA® iAMP®
Integrated Musical Instrument Amplifier.
We’re extremely proud of our iAMP® and
pleased that you have chosen it.

You will receive many years of satisfaction
from your iAMP®, which has been care-
fully designed to create accurate and excep-
tional sound from any musical instrument.

Our confidence is the result of an extensive
research and development program, our
innovative design philosophy, the use of the
finest quality components and state of the
art manufacturing. Every EA product incor-
porates the input from the many talented
and respected musicians who use EA’s
other products, from the critically acclaimed
Wizzy 12 to the “classic” iAMP 800 and
our one-of-a-kind  RUMBLE SEAT™.

A N

OTE 

F

ROM

E

UPHONIC 

A

UDIO

2

11

Summary of Contents for iAMP









Reviews: