7. Push the dust collector back into the main unit.
- It is recommended to empty the dust collector and clean the filter after every use.
- You can wash the dust collector, filter cover and foam filter with water. Be sure to air-dry them
thoroughly before reassembling. Do not wash the
high-performance
filter with water, as it may
damage the filter and reduce the suction power.
Clean the Rolling Brush
1. Pull on release tabs to unlock the brush guard as shown.
2. Lift the rolling brush to remove.
3. Clean the rolling brush with the provided cleaning tool or a vacuum cleaner.
4. Reinstall the rolling brush by inserting the fixed protruding end first, then clicking into place.
5. Press down to snap the brush guard into place.
