9
4. Specifications
Input voltage:
220-240 V ~ 50/60 Hz
Input current:
0.6A
Output:
Fast: 12V / 3.8A
Slow: 12V / 0.8A
6V: 6V / 0.8A
Lead-acid battery:
Max. 120 Ah
Protection class:
IP65
Dimensions:
approx. 18.5 x 6.5 x 4 cm
Temperature while
charging:
Weight:
10 to 40 °C
approx. 450 g
5. Safety instructions
The warning triangle highlights all instructions important for safety. Be sure to
follow these instructions at all times, otherwise you may be caused injury or the
unit may be damaged.
This unit is not intended to be used by those (including children) with restricted
physical, sensory or mental faculties, inexperience or lack of knowledge unless
under the supervision of or instructed by a person responsible for their safety as
to how the unit is to be used.
Children in particular must be supervised to ensure that they do not play with
the unit.
Only connect the unit to a professionally-installed socket. The voltage must
correspond with the details shown on the unit's rating plate.
Take care not to trap the mains cable, and protect it from sharp edges,
moisture, heat and oil.
The mains lead cannot be replaced. If the mains lead should be damaged, the
unit must be scrapped.
Do not use the unit, or pull the mains plug out immediately if it is damaged or
there is any suspicion of a defect. In such an event, please get in touch with our
technicians.
Always withdraw the mains plug when the unit is not in use.
Keep the packing material, particularly plastic sheets and bags, away from
children due to danger of suffocation.
Remove all protective foil from the unit before first using it.
Route the mains lead so that it does not obstruct you and so that no-one can
unintentionally pull on it.
Always disconnect the battery charger from the power supply as soon as the
charging procedure is complete.
Keep the charger in a safe place inaccessible for children and unauthorised
persons.
Only connect the charger to an easily-accessible socket 220-240V ~ 50 Hz, to
enable you to take action quickly in case of a fault.
