7
When used as directed, the voltage converter is maintenance-free.
After considerable use dirt and dust collects between the mobile device, the
protective cover and the receiver. This could cause chafe marks and scratches on the
device. For this reason clean the back of the device and the inside of the protective
cover regularly.
Do not dispose of electrical devices with the household waste! Electrical and
electronic devices must be collected separately and sent for environmentally friendly
recycling. Please contact your community or city administration regarding disposal
options for electrical and electronic scrap.
6. Operating instructions
Remove your smartphone from its protective cover. Clean the back and the inside of the
protective cover to remove dust and dirt. Connect the receiver to the charging connection
of your device. Place the receiving antenna on the back of your smartphone. Replace the
smartphone in its protective cover. Ensure that the lead and antenna are not bent or
otherwise damaged.
Once you have placed your mobile device on the charging pad of an induction charger,
charging will start automatically. Position your mobile device with the antenna in the centre
of the charging pad to ensure the best connection.
7. Maintenance and care
8. Notes regarding environmental protection
9. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
