manualshive.com logo in svg

EUCHNER CTA-L1, Operating Instructions Manual, Page: 17 / 52

Share
Download
EUCHNER CTA-L1 Operating Instructions Manual Download Page 17

17

2537376-01-04/21 (translation of the original operating instructions)

Operating Instructions

Transponder-Coded Safety Switch CTP/CTA-L1/2-BR

EN

9.  Mounting

CAUTION

Safety switches must not be bypassed (bridging of contacts), turned away, removed or otherwise 

rendered ineffective.

 

Ì

Observe EN ISO 14119:2013, section 7, for information about reducing the possibilities for by-

passing an interlocking device.

CAUTION

Risk of damage to equipment and malfunctions as a result of incorrect installation. 

 

Ì

Safety switches and actuators must not be used as an end stop.

 

Ì

Observe EN ISO 14119:2014, sections 5.2 and 5.3, for information about mounting the safety 

switch and the actuator. The following specifications must be observed:

 -Mounting with screws of property class 8.8 or higher. 

 -The minimum screw diameter for CTP devices is 4 mm, for CTA devices 5 mm.

 -Secure the fixing material against loosening (e.g. by means of medium-strength positive screw 

locking).

 

Ì

Protect the switch head against damage, as well as penetrating foreign objects such as swarf, 

sand and blasting shot, etc.

 

Ì

Observe the min. door radii (see chapter 

14.5.1. Dimension drawing for actuator CTP/CTA-… on 

page 45

).

 

Ì

Observe the tightening torque for mounting the switch:

 -For CTP devices: max. 1.4 Nm 

 -For CTA devices: max. 6 Nm

CAUTION

Device damage or malfunctions caused by material changes due to the environment.

 

Ì

In accordance with section 6.3 of EN ISO 14119:2014, the environmental influences (e.g. direct 

UV radiation or corrosion) must be checked before a guard locking device is used.

 

Ì

Contact the manufacturer if you have any questions about environmental influences or about use in 

aggressive environments.

A clearance of 12 mm must be maintained around the actuator head (see 

Figure 2

).

 min. 12 

 min. 12 

Figure 2: 

Actuator head clearance

Summary of Contents for CTA-L1





















































Reviews:

No comments