manualshive.com logo in svg

EUCHNER 105283, Operating Instructions Manual, Page: 2 / 42

Share
Download
EUCHNER 105283 Operating Instructions Manual Download Page 2

Operating Instructions Safety Systems
MGB-L..B-PN.-… (PROFINET) and With Data Structure Type A

2

(translation of the original operating instructions) 2114575-06-02/21

Contents

1. 

About this document ............................................................................................. 4

1.1. Scope ............................................................................................................................................4

1.1.1. 

Notes on older product versions ......................................................................................4

1.2. 

Target group ..................................................................................................................................4

1.3. 

Key to symbols ...............................................................................................................................4

1.4. 

Supplementary documents ..............................................................................................................4

2. 

Correct use .......................................................................................................... 5

3. 

Description of the safety function .......................................................................... 7

4. 

Exclusion of liability and warranty ......................................................................... 9

5. 

General safety precautions ................................................................................... 9

6. Function ............................................................................................................. 10

6.1. 

Interlocking module MGB-L0.B-PN. .................................................................................................10

6.2. 

Locking module MGB-L1.B-PN. and MGB-L2.B-PN. ...........................................................................10

6.3. 

Guard locking for version MGB-L1 ..................................................................................................11

6.4. 

Guard locking for version MGB-L2 ..................................................................................................11

6.5. 

Control of guard locking ................................................................................................................12
6.5.1. 

Case A .........................................................................................................................12

6.5.2. 

Case B .........................................................................................................................13

6.5.3. 

Case C .........................................................................................................................14

7. 

System overview................................................................................................. 15

7.1. 

Bus module MGB-B-…-PN ..............................................................................................................15

7.2. 

Locking/release module MGB-L.- ....................................................................................................16

7.3. 

Handle module MGB-H-…...............................................................................................................16

7.4. 

Escape release MGB-E-... (optional) ................................................................................................16

7.5. 

Dimension drawing .......................................................................................................................16

8. 

Manual release ................................................................................................... 17

8.1. 

Auxiliary release............................................................................................................................17

8.2. 

Lockout mechanism ......................................................................................................................18

8.3. 

Escape release (optional) ..............................................................................................................18
8.3.1. 

Preparing escape release ..............................................................................................19

9. Mounting ............................................................................................................ 20

9.1. 

Mounting lens ...............................................................................................................................21

10.  Changing actuating direction .............................................................................. 22

11.  Protection against environmental effects ............................................................. 23

12.  Controls and indicators ....................................................................................... 24

Summary of Contents for 105283











































Reviews:

No comments