eTung PLC-505, User Manual

Page: 68 / 73

PLC-505 User Manual
68
PLC-505 supports multiple vncviewers‟ remote access from different PCs (or
mobiles). This can be done by supporting multiple channels on agent client
functionality. Configure multiple lines in agent client configuration, and enable
all of them. For example, configure two channels as shown in the figure below,
each channel has touchscreen‟s IP as device IP, and vncserver‟s listening port
as device port. This allows two PCs (or mobile phones) to remote control the
touchscreen at the same time, thus implements device remote control in
different locations. PLC-505 support at most 5 channels, and each channel has
a 15-byte channel ID. The channel ID is derived from PLC-505‟s IMEI. For
example, PLC-505‟s IMEI is 240305001234567, then the agent clients‟ channel
ID is 2403055X1234567, and X can be 0~4, to represent one of the five
channels.
Figure Appendix 8-5: Configure multi-channel agent client
4. Connect PLC-505 and touchscreen with RJ45 net cable, plug SIM card in
PLC-505, tighten the antenna, and power on PLC-505.
5. Assign TCP port for terminals on LianWangBao server
Open browser on PC, visit LianWangBao server‟s web page:
plc.lianwangbao.com. First register a user and enable it, and then login with
username and password;