Figure 2. Changing the Device ID
6. Click the
Change Device ID
button or press <Enter> to change the device ID.
7. The utility prompts you to confirm your selection. Click
OK
if your selection is
correct; otherwise, click
Cancel
.
8. The utility displays a confirmation to indicate the process is complete. Click
OK
.
9. Power cycle the device to apply the changes.
Note
After you change the device ID, you must power cycle the
device and click
Find Devices
in the utility to update the list of
devices.
Configuring Multiple Devices with USB
You can connect multiple devices in the following ways:
■
Multiple USB 2.0 or 3.0 interfaces—One device for each interface
■
Single USB 2.0 or 3.0 interface—Multiple devices connected to a USB 2.0 or
3.0 hub
Tip
Sharing a single USB 2.0 or 3.0 controller interface on your host
computer among multiple devices may reduce overall signal throughput.
For maximum signal throughput, NI recommends that you connect no
more than one device per USB interface.
ni.com
10
USRP-2900/2901 Getting Started
