ettus N321, Getting Started Manual

Page: 1 / 17

N321 Getting Started Guide
Contents
1 Kit Contents
1.1 N300
♦
1.2 N310
♦
1.3 N320
♦
1.4 N321
♦
•
2 Verify the Contents of Your Kit
•
3 You Will Need
•
4 Proper Care and Handling
•
5 Install and Setup the Software Tools on Your Host Computer
•
6 Connecting the Device
6.1 Interfaces Overview
♦
6.2 Setting up a Serial Console Connection
6.2.1 Connecting to the microcontroller
◊
♦
6.3 Connecting to the ARM via SSH
♦
•
7 Updating the Linux File System
7.1 File System Partition Layout
♦
7.2 Updating the file system with Mender
7.2.1 Mender Update Process
◊
♦
7.3 Updating the files system by writing the disk image
♦
•
8 Updating the Network Configurations
•
9 Updating the FPGA Image
9.1 Network Mode FPGA Image Update
♦
9.2 Embedded Mode FPGA Image Update
♦
•
10 Setting Up a Streaming Connection
10.1 1Gb Streaming SFP Port 0
♦
10.2 10Gb Streaming SFP Port 1
♦
10.3 Dual 10Gb Streaming SFP Ports 0/1
♦
•
11 Verifying Device Operation
11.1 Subdevice Specification Mapping
11.1.1 N300
◊
11.1.2 N310
11.1.2.1 UHD 3.11.x.x - 3.12.x.x
⋅
11.1.2.2 UHD 3.13.x.x+
⋅
◊
11.1.3 N320
◊
11.1.4 N321
◊
♦
11.2 Supported Sample Rates
11.2.1 Example Sample Rates
◊
11.2.2 N320/N321 Example Sample Rates
◊
♦
11.3 Probe the USRP
11.3.1 N300/N310
◊
11.3.2 N320
◊
11.3.3 N321
◊
♦
11.4 ASCII Art Example
♦
11.5 Benchmarking your system
11.5.1 1 Gb Interface
◊
11.5.2 10 Gb Interface SFP 1
◊
11.5.3 Dual 10 Gb Interface
◊
♦
•
12 USRP N3xx Device Specific Operations
12.1 White Rabbit Ethernet-Based Synchronization
♦
12.2 N320/N321
♦
12.3 Turning the Device Off/On
♦
12.4 Enable Auto Booting
♦
12.5 Default Password
♦
•
13 Technical Support and Community Knowledge Base
•
14 Legal Considerations
•
15 Sales and Ordering Support
•
16 Terms and Conditions of Sale
•
USRP N300 •
DC Power Supply (12V, 7A) •
1 RJ45 ? SFP+ Adapter •
1 Gigabit Ethernet Cat-5e
Cable (3m) •
USB-A to Micro USB-B
Cable (1m) •
Getting Started Guide •
Ettus Research Sticker •