ettus N321, Getting Started Manual

Page: 2 / 17

USRP N310
•
DC Power Supply (12V, 7A)
•
1 RJ45 ? SFP+ Adapter
•
1 Gigabit Ethernet Cat-5e
Cable (3m)
•
USB-A to Micro USB-B
Cable (1m)
•
Getting Started Guide
•
Ettus Research Sticker
•
USRP N320 •
DC Power Supply (12V, 7A) •
1 RJ45 ? SFP+ Adapter •
1 Gigabit Ethernet Cat-5e
Cable (3m) •
USB-A to Micro USB-B
Cable (1m) •
Getting Started Guide •
Ettus Research Sticker •
USRP N321 •
DC Power Supply (12V, 7A) •
1 RJ45 ? SFP+ Adapter •
1 Gigabit Ethernet Cat-5e
Cable (3m) •
USB-A to Micro USB-B
Cable (1m) •
Getting Started Guide •
Ettus Research Sticker •
Ensure that your kit contains all the items listed above. If any items are missing, please contact sales@ettus.com? immediately.
microSD Card Writer
•
For Network Mode: A host computer with an available 1 or 10 Gigabit Ethernet interface for sample streaming. In addition to the Ethernet
interface used for sampling streaming, your host computer will require a separate 1 Gigabit Ethernet interface for command and control
streaming.
•
For Stand-Alone Embedded Mode: A host computer with an available 1 Gigabit Ethernet port or a USB 2.0 port to remotely access the
embedded Linux operating system running on ARM CPU.
•
All Ettus Research products are individually tested before shipment. The USRP is guaranteed to be functional at the time it is received by the customer.
Improper use or handling of the USRP can cause the device to become non-functional. Take the following precautions to prevent damage to the unit.
Never allow metal objects to touch the circuit board while powered.
•
Always properly terminate the transmit port with an antenna or 50? load.
•
Always handle the board with proper anti-static methods.
•