5
© Emerging Tech Trans, LLC
s
4.
PTFE tubing set (8 m, 8 channel) between applicator and device (fed through waveguide on MR
penetration panel to connect MR compatible components with the actual device sitting in the
control or operator room)
Figure 6 - The long PTFE tubing set with blue protective cover connects the subject mouthpiece with the device
5.
PTFE Inlet tubing set between tastant bottles and device
6.
Swallow sensor belt with digital input (optional)
7.
Coax connector (connects the device trigger in port to the BNC pin of the MR RF trigger
converter; not needed on non-Siemens systems)
8.
MRI RF Trigger converter (converts an optical trigger from the RF cabinet of the MRI system to a
TTL electrical signal that triggers the ETT Gustometer or ETT Olfactometer system; not needed
on non-Siemens systems)
