16
© Emerging Tech Trans, LLC
Figure 16 - The current file name is displayed next to the Paradigm ID. It can equal a subject identifier. File Manager can be used
to create a new file
Figure 17 - Click Create Data Folder to alter the current name. Then click Confirm to make the change.
Data file
Each paradigm will create a data file (dat.csv) in a subject folder on the connected USB flash drive that
logs the device state about every 100 ms. The file contains the current time, input trigger levels,
peripheral voltage levels, and the state of each channel including rinse (1-on, 0-off). This along with
screen shots of the current paradigm configuration is stored each time the paradigm is executed. If the
file name is not changed, new data will be appended to the existing dat.csv in the folder.
