manualshive.com logo in svg

ETS-Lindgren HI-2200, User Manual

Share
Download
ETS-Lindgren HI-2200 User Manual Download Page 21

 

Assembly and Installation 

 

 | 

21

 

4.0   Assembly and Installation 

 

Before connecting any components, follow the 

safety information in the ETS-Lindgren 

Product Information Bulletin included with your 

shipment. 

Installing the Batteries 

The batteries for the HI-2200 RF Survey Meter are shipped uninstalled. To install 

the batteries, retrieve the battery tray with the four AA batteries from the HI-2200 

carrying case, and then follow these instructions: 

1. 

Remove the end cap and bottom panel by unscrewing the four Phillips 

head screws. 

2. 

Remove the washers, the protective end cap, and the metal cover. 

 

 

 

3. 

Slide the battery tray, including the batteries, into the meter case so 

the posts align with the contacts inside. 

4. 

Replace the bottom panel and end cap. 

5. 

With a washer around each screw, re-insert the screws to secure the 

bottom panel and end cap into place. 

Summary of Contents for HI-2200






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands