14
After altering the video server network settings, click
Apply
to apply the changes.
A prompt for the administrator authentication will be displayed:
The default password for the administrator account (root) is
pass
. Enter the
default password and click
OK
to confirm the changes.
After applying the new network settings, the video server will reboot; this
process takes about 45 seconds. The video server’s Power LED light will blink
during the reboot process; the light will become stable once reboot is complete.
Exit the “Setting Page” by clicking
Close
, and wait for the reboot to complete.
After rebooting, press
Scan
to verify the new IP address. If using DHCP, then the
MAC address may be necessary to accurately identify a specific camera.
“DOUBLE Right Click Function”: Double right click on a specific IP address
on the list to quickly open the Live View browser page.
Press Exit to quit EtroScan™.
2.4 Access the Video Server Web Interface
MS Internet Explorer is used to access and configure the video server. When
accessing a video server using the web interface for the first time, some
configuration for ActiveX controls may be required.
1.
Open the IE browser
2.
Type in the IP address of the video server
