10
Properly align the wiring and terminals when connecting; an improper
connection can damage the camera.
Please review the Power Output Specifications in section 1.8 before using.
To remove the cable from the digital I/O socket, press down on the wire release
and pull the cable.
2.3 Initial Network Configuration
To configure the video server’s network settings use the EtroScan™ utility.
Factory IP Address
Below are the initial factory IP address settings for the video server:
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Gateway 192.168.1.1
Restoring the factory default settings will reset the network settings to the factory
IP address settings (see the “Reset Factory Default Settings” section for more
information).
Alter the Network Domain
Alter the IP address of the PC to the same network domain of video server’s
initial IP address, 192.168.1.2.
Here is an example of PC network settings used to configure the video server.
