Four Channel’s GSM VoIP Gateway
8
Channel 3
When the GoIP400’s GSM channel3
login to ISP’s system, this LED will flash 1s
ON and 1s OFF;
Channel 4
When the GoIP400’s GSM channel4 login
to ISP’s system, this LED will flash 1s
ON and 1s OFF;
2.4 SMS Commands
GoIP400 supported some maintenance commands come from SMS.
FUNCTION
SMS CONTENT
REMARK
Obtain LAN Port Info
INFO
Not distinguish majuscule and lowercase
Reset device
RESET
Password
Not distinguish majuscule and lowercase
Reboot device
REBOOT
Password
Not distinguish majuscule and lowercase
Note
：
1)
Send “INFO” or “info” to GOIP400 by SMS, the GOIP400 will return to
its own LAN Ethernet port and send information to the mobile-phone.
2)
Do reset by SMS, but you must certificate the password. Specific usage is as
follows:
a.
The keyword “reset”/“reboot” cases open, but the password is not.
b.
After perform “reset”, GOIP400 will reboot automatically.
If perform “reset”, the password of “admin” is “tengda”, input in the SMS:
“Reset tengda” or “RESET tengda”;
If perform “reboot”
，
the password of “admin” is “tengda”, input in the SMS:
“Reboot tengda” or “REBOOT tengda”.
3 Configuration Guide
To configure the GoIP400 Gateway, you must login to its Web server via the LAN or
PC port.
The LAN port is factory preset to obtain an IP from the local DHCP host and
the PC port is set to the fixed IP 192.168.8.1.
If a local DHCP host is available, the LAN will obtain an IP address automatically. To
listen to the IP address assigned, just dial a call via the GoIP400 Gateway’s SIM card
phone number. When the call is connected, you will hear a dial tone. Just dial “*01#” for
English voice prompt on the LAN IP and “*00#” for Chinese voice prompt on the LAN IP.
The LAN IP Address can also be obtained by sending a SMS message to the GSM phone
number. The GoIP400 will then reply with a SMS message containing the LAN IP address.
If you want obtained LAN port IP by sending a SMS message, please send”
INFO
“or”
info
”.
