12 | 24
Etrel Load Guard | User manual
|
Figure 18: Display of configuration of all network interfaces of the computer
In the case presented in the above figure, the computer does not have
Wi-Fi module, and only options of wired interfaces are shown (ethernet).
The part of the IP address that is inside of red rectangle must be the same
as it is written in the Load Guard Configuration Software settings. If this is
not true, the software could not find the Load Guard and even if Load
Guard is found, the configuration is not possible.
CHARGING STATION IP ADDRESS
If the IP address of the charging station is not known, press the reset key
for 5 seconds (figure below).
Figure 19: Charging station reset button
On the charging station display the message
Entering service menu
will
be shown and after that also the IP address. To obtain the charging station
IP address, press the sign of three dots for 5 s (in the upper right corner).
