ETQ TG17M41, Owner'S Manual

Page: 11 / 68

ETQ
EASTERN TOOLS & EQUIPMENT INC Tele: (888)908-6200 Web Site: easterntools.com
10
Security system 180 -
AM / FM clock radio 300 -
½ HP Garage door opener 480 520
40 Gallon electric water
heater
4000 -
DIY / Job Site
Halogen work light 1000 -
1/3 HP Airless sprayer 600 1200
Reciprocating Saw 960 960
½ HP Electric Drill 1000 1000
7 ¼ “ Circular saw 1500 1500
10” Miter saw 1800 1800
6” Table Planer 1800 1800
10” Table saw / Radial arm
saw
2000 2000
1 ½ HP air compressor 2500 2500
Note: wattages listed are only approximates. Check
your electrical device for actual wattage.
STOPPING THE ENGINE
•
Unplug all the electrical loads from the
generator panel (Figure 1).
Figure 1.
•
Let the engine run at no-load for several
minutes to stabilize the internal
temperatures of engine and generator.
•
Turn the engine switch to the "OFF" position
(Figure 2).
Figure 2.
•
Turn the fuel valve to the "OFF" position
(Figure 3).
Figure 3.