ETNA EKP327WIT, Manual

Page: 12 / 19

10
Preparing for use
Positioning

Place the hob on a firm, flat surface.

Keep a minimum space of 5 cm around the
hob.

Wall socket and plug must be accessible at
all times.

Do not place any inflammable or deformable
objects immediately under the hob.

The appliance may be placed on top of a
table or work top. The surface has to be
heat resistant (>90 ºC).
Electrical connection

Put the plug in a socket.

Make sure that the connecting cable does
not come into contact with parts that
become hot.
Importeren
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety
The appliance is connected according to the
connection scheme 230 V 2Nac. If a different
connection is needed, the appliance should
only be connected by a qualified fitter .
Improper connection can cause the hotplates to
burn out. This is not covered by the guarantee.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
For your safety
Read the separate safety instructions
before using the device!
PREPARING FOR USE USE/SAFETY