ETNA CM450RVS, Instructions For Use Manual

Page: 36 / 112

EN 10
BEFORE USE
Installation of the hooks
Install the hooks with ‘R’ at the rear holes of the cavity.
Install the hook with ‘F’ at the front holes of the cavity.
Please remove the tape on the side of the cavity before the
installation of the hooks.
1. First, install the hook into hole ‘a’.
2. Then, push the hook into hole ‘b’.
3. Finally, push the hook down into the right place.
Installation of the racks
Note the difference between the left and right rack.
The left rack.
The right rack.
1
2
3
a
b